Results of an international interlaboratory study on dioxin-like activities in drinking-, river surface- and wastewater using DR CALUX bioassay.

Aquatic animals and consumers of aquatic animals are exposed to increasingly complex mixtures of known and as-yet-unknown chemicals with dioxin-like toxicities in the water cycle. Effect- and cell-based bioanalysis can cover known and yet unknown dioxin and dioxin-like compounds as well as complex mixtures thereof but need to be standardized and integrated into international guidelines for environmental testing. In an international laboratory testing (ILT) following ISO/CD 24295 as standard procedure for rat cell-based DR CALUX un-spiked and spiked extracts of drinking-, surface-, and wastewater were validated to generate precision data for the development of the full ISO-standard. We found acceptable repeatability and reproducibility ranges below 36 % by DR CALUX bioassay for the tested un-spiked and spiked water of different origins. The presence of 17 PCDD/Fs and 12 dioxin-like PCBs was also confirmed by congener-specific GC-HRMS analysis. We compared the sum of dioxin-like activity levels measured by DR CALUX bioassay (expressed in 2,3,7,8-TCDD Bioanalytical Equivalents, BEQ; ISO 23196, 2022) with the obtained GC-HRMS chemical analysis results converted to toxic equivalents (TEQ; van den Berg et al., 2013).

Global survey of dioxin- and thyroid hormone-like activities in consumer products and toys.

BACKGROUND: Children and consumers are exposed to increasingly complex mixtures of known and as-yet-unknown toxic chemicals from toys and products. However traditional chemical analysis methods only evaluate a small number of chemicals at a time thereby restricting consumer awareness of the full range of potentially harmful chemicals in products. METHODS: We used high-throughput effect-based non-animal methods to investigate exposures to complex chemical mixtures of several kinds of brominated flame retardants (BFRs) for their dioxin- and thyroid hormone-like activities in various kinds of consumer products and toys from 26 different countries, on four continents (Africa, America, Asia and Europe) in combination with chemical analysis of various polybrominated flame retardants (BFRs) and their impurities (such as polyhalogenated PCDD/Fs and PBDD/Fs). RESULTS: We found high levels of polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs) in toys and now, for the first time, also in consumer products that are manufactured from black plastics containing certain brominated flame retardants (BFRs). The presence of PBDD/PBDFs as well as other BFRs in various black plastic materials from additional countries as well as additional kinds of consumer products as confirmed by effect-based in vitro reporter gene DR CALUX and TTR-TRß CALUX assays as well as congener-specific chemical analysis. We compared total Toxicity Equivalent (TEQ) levels of PBDD/F-TEQs analysed by chemical analysis to by CALUX bioassay measured Biological equivalence (BEQ) concentrations (for further info see at ISO 23196, ISO, 2022). In the case of TBBPA, both chemical and TTR-TRß CALUX analysis measure direct the amount of TBBPA. Finally, the daily ingestion of 2,3,7,8-TCDD equivalents from PBDD/Fs-contaminated plastic toys by child mouthing habits have been related to our earlier study (Budin et al., 2020). CONCLUSIONS: Interaction of children with such contaminated plastics may significantly contribute to the daily uptake of dioxin- and thyroid hormone transport disrupting-like compounds. Effect-based bioassays for dioxin- and thyroid hormone-like activities are relevant to pick-out such complex mixtures of known and yet unknown (and therefore not regulated) substances for safer and more sustainable plastics. Low POPs Content Levels and other mechanisms set under the Basel and Stockholm Conventions are set far too high to prevent a significant flow of BFRs and PBDD/Fs into consumer products.

Interlaboratory Study to Evaluate a Testing Protocol for the Safety of Food Packaging Coatings.

According to European regulations, migration from food packaging must be safe. However, currently, there is no consensus on how to evaluate its safety, especially for non-intentionally added substances (NIAS). The intensive and laborious approach, involving identification and then quantification of all migrating substances followed by a toxicological evaluation, is not practical or feasible. In alignment with the International Life Sciences Institute (ILSI) and the European Union (EU) guidelines on packaging materials, efforts are focused on combining data from analytics, bioassays and in silico toxicology approaches for the risk assessment of packaging materials. Advancement of non-targeted screening approaches using both analytical methods and in vitro bioassays is key. A protocol was developed for the chemical and biological screening of migrants from coated metal packaging materials. This protocol includes guidance on sample preparation, migrant simulation, chemical analysis using liquid chromatography (LC-MS) and validated bioassays covering endocrine activity, genotoxicity and metabolism-related targets. An inter-laboratory study was set-up to evaluate the consistency in biological activity and analytical results generated between three independent laboratories applying the developed protocol and guidance. Coated packaging metal panels were used in this case study. In general, the inter-laboratory chemical analysis and bioassay results displayed acceptable consistency between laboratories, but technical differences led to different data interpretations (e.g., cytotoxicity, cell passages, chemical analysis). The study observations with the greatest impact on the quality of the data and ultimately resulting in discrepancies in the results are given and suggestions for improvement of the protocol are made (e.g., sample preparation, chemical analysis approaches). Finally, there was agreement on the need for an aligned protocol to be utilized by qualified laboratories for chemical and biological analyses, following best practices and guidance for packaging safety assessment of intentionally added substances (IAS) and NIAS to avoid inconsistency in data and the final interpretation.

Hormone receptor activities of complex mixtures of known and suspect chemicals in personal silicone wristband samplers worn in office buildings.

Humans are exposed to increasingly complex mixtures of hormone-disrupting chemicals from a variety of sources, yet, traditional research methods only evaluate a small number of chemicals at a time. We aimed to advance novel methods to investigate exposures to complex chemical mixtures. Silicone wristbands were worn by 243 office workers in the USA, UK, China, and India during four work shifts. We analyzed extracts of the wristbands for: 1) 99 known (targeted) chemicals; 2) 1000+ unknown chemical features, tentatively identified through suspect screening; and 3) total hormonal activities towards estrogen (ER), androgen (AR), and thyroid hormone (TR) receptors in human cell assays. We evaluated associations of chemicals with hormonal activities using Bayesian kernel machine regression models, separately for targeted versus suspect chemicals (with detection ≥50%). Every wristband exhibited hormonal activity towards at least one receptor: 99% antagonized TR, 96% antagonized AR, and 58% agonized ER. Compared to men, women were exposed to mixtures that were more estrogenic (180% higher, adjusted for country, age, and skin oil abundance in wristband), anti-androgenic (110% higher), and complex (median 836 detected chemical features versus 780). Adjusted models showed strong associations of jointly increasing chemical concentrations with higher hormonal activities. Several targeted and suspect chemicals were important co-drivers of overall mixture effects, including chemicals used as plasticizers, fragrance, sunscreen, pesticides, and from other or unknown sources. This study highlights the role of personal care products and building microenvironments in hormone-disrupting exposures, and the substantial contribution of chemicals not often identifiable or well-understood to those exposures.

Replacing animal-derived components in in vitro test guidelines OECD 455 and 487.

The evaluation of single substances or environmental samples for their genotoxic or estrogenic potential is highly relevant for human- and environment-related risk assessment. To examine the effects on a mechanism-specific level, standardized cell-based in vitro methods are widely applied. However, these methods include animal-derived components like fetal bovine serum (FBS) or rat-derived liver homogenate fractions (S9-mixes), which are a source of variability, reduced assay reproducibility and ethical concerns. In our study, we evaluated the adaptation of the cell-based in vitro OECD test guidelines TG 487 (assessment of genotoxicity) and TG 455 (detection of estrogenic activity) to an animal-component-free methodology. Firstly, the human cell lines A549 (for OECD TG 487), ERα-CALUX® and GeneBLAzer™ ERα-UAS-bla GripTite™ (for OECD TG 455) were investigated for growth in a chemically defined medium without the addition of FBS. Secondly, the biotechnological S9-mix ewoS9R was implemented in comparison to the induced rat liver S9 to simulate in vivo metabolism capacities in both OECD test guidelines. As a model compound, Benzo[a]pyrene was used due to its increased genotoxicity and endocrine activity after metabolization. The metabolization of Benzo[a]Pyrene by S9-mixes was examined via chemical analysis. All cell lines (A549, ERα-CALUX® and GeneBLAzer™ Erα-UAS-bla GripTite™) were successfully cultivated in chemically defined media without FBS. The micronucleus assay could not be conducted in chemically defined medium due to formation of cell clusters. The methods for endocrine activity assessment could be conducted in chemically defined media or reduced FBS content, but with decreased assay sensitivity. The biotechnological ewoS9R showed potential to replace rat liver S9 in the micronucleus in FBS-medium with A549 cells and in the ERα-CALUX® assay in FBS- and chemically defined medium. Our study showed promising steps towards an animal-component free toxicity testing. After further improvements, the new methodology could lead to more reproducible and reliable results for risk assessment.

How the Structure of Per- and Polyfluoroalkyl Substances (PFAS) Influences Their Binding Potency to the Peroxisome Proliferator-Activated and Thyroid Hormone Receptors-An In Silico Screening Study.

In this study, we investigated PFAS (per- and polyfluoroalkyl substances) binding potencies to nuclear hormone receptors (NHRs): peroxisome proliferator-activated receptors (PPARs) α, ß, and γ and thyroid hormone receptors (TRs) α and ß. We have simulated the docking scores of 43 perfluoroalkyl compounds and based on these data developed QSAR (Quantitative Structure-Activity Relationship) models for predicting the binding probability to five receptors. In the next step, we implemented the developed QSAR models for the screening approach of a large group of compounds (4464) from the NORMAN Database. The in silico analyses indicated that the probability of PFAS binding to the receptors depends on the chain length, the number of fluorine atoms, and the number of branches in the molecule. According to the findings, the considered PFAS group bind to the PPARα, ß, and γ only with low or moderate probability, while in the case of TR α and ß it is similar except that those chemicals with longer chains show a moderately high probability of binding.

Aryl hydrocarbon reporter gene bioassay for screening polyhalogenated dibenzo-p-dioxins/furans and dioxin-like polychlorinated biphenyls in hydrochar and sewage sludge.

The suitability of the AhR reporter gene bioassays to screen the presence of polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (dl-PCBs) in sewage sludge (SL) and related hydrochar (HC) was here investigated. Samples of SL obtained from six WWTPs were processed by hydrothermal carbonization to obtain the resultant HCs and both tested with DR-CALUX® bioassay. Levels of PCDD/Fs and dl-PCBs were also determined analytically in the same samples by GC-MS/MS. Bioanalytical Toxicity Equivalent values (BEQ) resulted in one order of magnitude higher in HC compared to SL samples and those obtained from the dl-PCBs fraction higher than those from PCDD/Fs. BEQ and TEQWHO values, the latter obtained by GC-MS/MS analysis on the same matrices, were highly correlated showing also a similar trend in the six WWTPs (RS= 0.8252, p < 0.001; Pearson's R RP =0.8029, p < 0.01). The suitability of AhR bioassays and in particular of the DR-CALUX® to screen the presence and biological activity of legacy organohalogen compounds in both SL and HC matrices was demonstrated for the first time which support their usage for the assessment of potential risks associated with their further environmental applications.

Biological effect and chemical monitoring of Watch List substances in European surface waters: Steroidal estrogens and diclofenac - Effect-based methods for monitoring frameworks.

Three steroidal estrogens, 17α-ethinylestradiol (EE2), 17ß-estradiol (E2), estrone (E1), and the non-steroidal anti-inflammatory drug (NSAID), diclofenac have been included in the first Watch List of the Water Framework Directive (WFD, EU Directive 2000/60/EC, EU Implementing Decision 2015/495). This triggered the need for more EU-wide surface water monitoring data on these micropollutants, before they can be considered for inclusion in the list of priority substances regularly monitored in aquatic ecosystems. The revision of the priority substance list of the WFD offers the opportunity to incorporate more holistic bioanalytical approaches, such as effect-based monitoring, alongside single substance chemical monitoring. Effect-based methods (EBMs) are able to measure total biological activities (e.g., estrogenic activity or cyxlooxygenase [COX]-inhibition) of specific group of substances (such as estrogens and NSAIDs) in the aquatic environment at low concentrations (pg/L). This makes them potential tools for a cost-effective and ecotoxicologically comprehensive water quality assessment. In parallel, the use of such methods could build a bridge from chemical status assessments towards ecological status assessments by adressing mixture effects for relevant modes of action. Our study aimed to assess the suitability of implementing EBMs in the WFD, by conducting a large-scale sampling and analysis campaign of more than 70 surface waters across Europe. This resulted in the generation of high-quality chemical and effect-based monitoring data for the selected Watch List substances. Overall, water samples contained low estrogenicity (0.01-1.3 ng E2-Equivalent/L) and a range of COX-inhibition activity similar to previously reported levels (12-1600 ng Diclofenac-Equivalent/L). Comparison between effect-based and conventional analytical chemical methods showed that the chemical analytical approach for steroidal estrogens resulted in more (76%) non-quantifiable data, i.e., concentrations were below detection limits, compared to the EBMs (28%). These results demonstrate the excellent and sensitive screening capability of EBMs.

Extensive rain events have a more substantial impact than advanced effluent treatment on the endocrine-disrupting activity in an effluent-dominated small river.

Wastewater treatment plants (WWTPs) remain an important primary source of emission for endocrine-disrupting compounds in the environment. As an advanced wastewater treatment process, ozonation is known to reduce endocrine-disrupting activity. However, it remains unclear to which extend improved wastewater treatment may reduce the endocrine-disrupting activity in the receiving water body. The present study investigated possible factors for the endocrine-disrupting activity in a small receiving water body, the Wurm River (North-Rhine Westphalia, Germany), up- and downstream of a local WWTP. The cell-based reporter gene CALUX® assay was applied to identify the endocrine-disrupting activity in the water, sediment, and suspended particulate matter. The water phase and the effluent sampling were primarily driven by applying the full-scale effluent ozonation (sampling campaigns in June 2017 and March 2019). In contrast, the sediment sampling aimed to compare the particle-bound endocrine-disrupting activity during dry (June 2017) and rainy summer (June 2018) seasons. The water phase showed low to moderate estrogenic/antiandrogenic activity. Advanced effluent treatment by ozonation led to a complete reduction of the endocrine-disrupting activity according to the limit of detection of the CALUX® assays. The suspended particulate matter originated from the water phase of the second sampling campaign revealed antiandrogenic activity only. Sediments at the sampling sites along the local WWTP revealed higher estrogenic and antiandrogenic activity after extensive rain events and were not affected by the ozonated effluent. Fluctuation patterns of the endocrine-disrupting activity in sediments were in line with fluctuated concentrations of polycyclic aromatic hydrocarbons. Rainwater overflow basin release was suggested as a vector for particle-bound and dissolved endocrine-disrupting activity in the receiving water body. The present study underlined the necessity for monitoring both water and sediment phases to achieve reliable profiling of the endocrine-disrupting activity. The receptor-mediated CALUX® assays were proven to be suitable for investigating the endocrine-disrupting activity distribution in different river compartments and WWTP effluents.

Developing potency factors for thyroid hormone disruption by PFASs using TTR-TRß CALUX® bioassay and assessment of PFASs mixtures in technical products.

BACKGROUND: Over the last decade, per- and polyfluoroalkyl substances (PFASs) have become one of the most heavily investigated persistent organohalogen compound class of environmental concern. However, knowledge about their toxicology is still scarce, although PFASs as individual compounds and their industrial mixtures were shown to exert effects on the thyroid hormone system. METHODS: In vitro toxicity potency factors were established for thyroid hormone transport disruption potential using the novel TTR-TRß CALUX® bioassay for major PFASs. We assessed technical PFASs mixtures, including aqueous film-forming foam (AFFF) surfactants and chromium mist suppressants (CMS) applications with and without total oxidizable precursor (TOP) by TTR-TRß CALUX® assay for their thyroid hormone transport disrupting potential. RESULTS: All PFASs listed in the German guideline for drinking water (German Environment Agency, 2017) affected the T4 binding to TTR, an important plasma thyroid hormone transport protein. For all tested PFASs, potency factors based on PC80 values relative to PFOA could be obtained and ranged between PFBA (0.0018) and PFOS (2.0). Applying in vitro potency factors obtained from the present in vitro TTR-TRß CALUX® assay study and recently reported in vivo potency factors (Zeilmaker et al., 2018; Bil et al., 2021) on the above-mentioned German guideline for PFAS in drinking water, showed that the cumulative effect-based trigger values (in vivo and in vitro) are comparable (3.0 vs. 2.9 to 4.6 µg PFOA-EQ/l). Additionally, AFFF surfactants and CMS with and without TOP assay were tested. Highest activities were found in the older AFFF surfactants (2013/2014) due to higher PFOS/PFOA levels, which were already substituted with 6:2 FTS in 2019, resulting in much lower PFOA-EQ levels. As expected also the PFOA-EQ levels increased in the samples with TOP treatment compared to the original AFFF surfactants and CMS as confirmed here by biological and chemical PFOA-equivalents (PFOA-EQ) analysis. Additionally, CMS (which have been used in the electroplating chromium industry since the 1950s) as well as PFOS-free, but not PFAS-free fume suppressants (such as Fumetrol® 21) have been tested in the TTR-TRß CALUX® assay and showed much lower activity levels then the AFFFs, confirmed by the similar potency determination based on chemical PFASs analysis followed by transformation to PFOA-EQ for comparison. The potency factor of 6:2 FTS, which is the main substitute for PFOS in CMS, indicates that it is approximately 100-times less potent as a thyroid hormone disruptor as compared to PFOS. CONCLUSION: Potency factors based on PC80 values from TTR-TRß CALUX® relative to PFOA have been developed for major PFASs. In AFFF surfactants and CMS a trend of higher activities with higher amounts of PFOS and PFOA have been found. PFOA and PFOS showed high responses in the TTR-TRß CALUX® assay and had the largest contributions to the PFOA-EQs in the AFFF surfactants and CMS applications. Using potency factors as determined in the TTR-TRß CALUX® to convert PFASs assessed by chemical analysis to PFOA-EQ led to comparable results as compared to the results from PFASs measured directly by the TTR-TRß CALUX® assay. This study supports the claim that semiquantitative effect- and group-based in vitro CALUX bioanalysis tools can be applied effectively to assess industrial products containing complex mixtures with PFAS compounds for which no instrumental analysis are established, and for many compounds where in vitro toxicity data are not yet available.

Occurrence and spatial distribution of dioxin and dioxin-like compounds in topsoil of Taranto (Apulia, Italy) by GC-MS analysis and DR-CALUX® bioassay.

The aim of the present study was to assess the occurrence and spatial distribution of PCDD/Fs and dioxin-like compounds in topsoils of Taranto (Apulia Region), one of the most heavily industrialized and contaminated area of Southern Italy. A combined approach of chemical analysis by GC-MS/MS and AhR reporter gene bioassay was applied in a subset of topsoil samples (n = 20) collected in 2017-18 from ten sites embracing three levels of risk (from high to low) in the framework of a large survey inside Taranto municipality. TCDD-BEQs and GC-MS/MS TEQWHO and TEQTHEORETICAL revealed a decreasing trend with the distance from main industrial settings and landfill areas. A strong correlation between TCDD-BEQs and TEQWHO values (R2 = 0.85) and TEQTHEORETICAL (R2 = 0.88) was also found. In 3 out of 10 topsoil investigated, BEQs and TEQWHO/THEORETICAL resulted above Italian National Regulatory Limits for ∑PCDD/Fs in green, private and recreational used soils (10 ng TEQ/kg d.w. D.Lgs 152/2006) and for ∑PCDD/F/dl-PCBs in agricultural and farming soil (6 ng TEQ/kg d.w. D.M. 46/2019). GC-MS/MS pattern revealed the highest prevalence of dl-PCBs in 6 out of 10 sites, followed by PCDFs and PCDDs. Those sites are all located in proximity of main industrial steel and iron ore sinter plant, steel plant's landfills and illegal dumping sites. An update on occurrence and spatial distribution of PCDD/Fs and dl-PCBs contamination of Taranto urban soils was obtained and the DR-CALUX® bioassay was further recommended as a suitable screening tool for environmental and human risk assessment.

Assessing Indoor Dust Interference with Human Nuclear Hormone Receptors in Cell-Based Luciferase Reporter Assays.

BACKGROUND: Per- and polyfluoroalkyl substances (PFAS), organophosphate esters (OPEs), and polybrominated diphenyl ethers (PBDEs) are hormone-disrupting chemicals that migrate from building materials into air and dust. OBJECTIVES: We aimed to quantify the hormonal activities of 46 dust samples and identify chemicals driving the observed activities. METHODS: We evaluated associations between hormonal activities of extracted dust in five cell-based luciferase reporter assays and dust concentrations of 42 measured PFAS, OPEs, and PBDEs, transformed as either raw or potency-weighted concentrations based on Tox21 high-throughput screening data. RESULTS: All dust samples were hormonally active, showing antagonistic activity toward peroxisome proliferator-activated receptor (PPARγ2) (100%; 46 of 46 samples), thyroid hormone receptor (TRß) (89%; 41 samples), and androgen receptor (AR) (87%; 40 samples); agonist activity on estrogen receptor (ERα) (96%; 44 samples); and binding competition with thyroxine (T4) on serum transporter transthyretin (TTR) (98%; 45 samples). Effects were observed with as little as 4µg of extracted dust. In regression models for each chemical class, interquartile range increases in potency-weighted or unknown-potency chemical concentrations were associated with higher hormonal activities of dust extracts (potency-weighted: ΣPFAS-TRß, ↑28%, p<0.05; ΣOPEs-TRß, ↑27%, p=0.08; ΣPBDEs-TRß, ↑20%, p<0.05; ΣPBDEs-ERα, ↑7.7%, p=0.08; unknown-potency: ΣOPEs-TTR, ↑34%, p<0.05; ΣOPEs-AR, ↑13%, p=0.06), adjusted for chemicals with active, inactive, and unknown Tox21 designations. DISCUSSION: All indoor dust samples exhibited hormonal activities, which were associated with PFAS, PBDE, and OPE levels. Reporter gene cell-based assays are relatively inexpensive, health-relevant evaluations of toxic loads of chemical mixtures that building occupants are exposed to. https://doi.org/10.1289/EHP8054.

In vitro human cell-based TTR-TRß CALUX assay indicates thyroid hormone transport disruption of short-chain, medium-chain, and long-chain chlorinated paraffins.

Over the last decades, short-chain chlorinated paraffins (SCCPs), medium-chain chlorinated paraffins (MCCPs), and long-chain chlorinated paraffins (LCCPs) have become the most heavily produced monomeric organohalogen compound class of environmental concern. However, knowledge about their toxicology is still scarce, although SCCPs were shown to have effects on the thyroid hormone system. The lack of data in the case of MCCPs and LCCPs and the structural similarity with perfluoroalkyl substances (PFAS) prompted us to test CPs in the novel TTR-TR CALUX assay for their thyroid hormone transport disrupting potential. Four self-synthesized and additionally purified single chain length CP mixtures (C10-CPs, C11-CPs, C14-CPs and C16-CPs) and two each of industrial MCCP and LCCP products were tested in parallel with PFOA. All CP mixtures influenced the TTR binding of T4, giving activities of 1,300 to 17,000 µg/g PFOA equivalents and lowest observable effect concentrations (LOELs) of 0.95 to 0.029 mM/L incubate. Highest activities and lowest LOELs were observed for C16-CPs (48.3% Cl content, activity 17,000, LOEL 0.047 mM/L) and a LCCP mixture (71.7% Cl content; activity 10,000; LOEL 0.029 mM/L). A trend of higher activities and lower LOELs towards longer chains and higher chlorination degrees was implied, but could not be statistically confirmed. Irrespectively, the less well examined and current-use LCCPs showed the highest response in the TTR-TRß CALUX assay.

Towards a systematic use of effect biomarkers in population and occupational biomonitoring.

Effect biomarkers can be used to elucidate relationships between exposure to environmental chemicals and their mixtures with associated health outcomes, but they are often underused, as underlying biological mechanisms are not understood. We aim to provide an overview of available effect biomarkers for monitoring chemical exposures in the general and occupational populations, and highlight their potential in monitoring humans exposed to chemical mixtures. We also discuss the role of the adverse outcome pathway (AOP) framework and physiologically based kinetic and dynamic (PBK/D) modelling to strengthen the understanding of the biological mechanism of effect biomarkers, and in particular for use in regulatory risk assessments. An interdisciplinary network of experts from the European chapter of the International Society for Exposure Science (ISES Europe) and the Organization for Economic Co-operation and Development (OECD) Occupational Biomonitoring activity of Working Parties of Hazard and Exposure Assessment group worked together to map the conventional framework of biomarkers and provided recommendations for their systematic use. We summarized the key aspects of this work here, and discussed these in three parts. Part I, we inventory available effect biomarkers and promising new biomarkers for the general population based on the H2020 Human Biomonitoring for Europe (HBM4EU) initiative. Part II, we provide an overview AOP and PBK/D modelling use that improved the selection and interpretation of effect biomarkers. Part III, we describe the collected expertise from the OECD Occupational Biomonitoring subtask effect biomarkers in prioritizing relevant mode of actions (MoAs) and suitable effect biomarkers. Furthermore, we propose a tiered risk assessment approach for occupational biomonitoring. Several effect biomarkers, especially for use in occupational settings, are validated. They offer a direct assessment of the overall health risks associated with exposure to chemicals, chemical mixtures and their transformation products. Promising novel effect biomarkers are emerging for biomonitoring of the general population. Efforts are being dedicated to prioritizing molecular and biochemical effect biomarkers that can provide a causal link in exposure-health outcome associations. This mechanistic approach has great potential in improving human health risk assessment. New techniques such as in silico methods (e.g. QSAR, PBK/D modelling) as well as 'omics data will aid this process. Our multidisciplinary review represents a starting point for enhancing the identification of effect biomarkers and their mechanistic pathways following the AOP framework. This may help in prioritizing the effect biomarker implementation as well as defining threshold limits for chemical mixtures in a more structured way. Several ex vivo biomarkers have been proposed to evaluate combined effects including genotoxicity and xeno-estrogenicity. There is a regulatory need to derive effect-based trigger values using the increasing mechanistic knowledge coming from the AOP framework to address adverse health effects due to exposure to chemical mixtures. Such a mechanistic strategy would reduce the fragmentation observed in different regulations. It could also stimulate a harmonized use of effect biomarkers in a more comparable way, in particular for risk assessments to chemical mixtures.

First Attempt to Couple Proteomics with the AhR Reporter Gene Bioassay in Soil Pollution Monitoring and Assessment.

A topsoil sample obtained from a highly industrialized area (Taranto, Italy) was tested on the DR-CALUX® cell line and the exposed cells processed with proteomic and bioinformatics analyses. The presence of polyhalogenated compounds in the topsoil extracts was confirmed by GC-MS/MS analysis. Proteomic analysis of the cells exposed to the topsoil extracts identified 43 differential proteins. Enrichment analysis highlighted biological processes, such as the cellular response to a chemical stimulus, stress, and inorganic substances; regulation of translation; regulation of apoptotic process; and the response to organonitrogen compounds in light of particular drugs and compounds, extrapolated by bioinformatics all linked to the identified protein modifications. Our results confirm and reflect the complex epidemiological situation occurring among Taranto inhabitants and underline the need to further investigate the presence and sources of inferred chemicals in soils. The combination of bioassays and proteomics reveals a more complex scenario of chemicals able to affect cellular pathways and leading to toxicities rather than those identified by only bioassays and related chemical analysis. This combined approach turns out to be a promising tool for soil risk assessment and deserves further investigation and developments for soil monitoring and risk assessment.

Combining Different In Vitro Bioassays to Evaluate Genotoxicity of Water-Accommodated Fractions from Petroleum Products.

Genotoxicity assessment is of high relevance for crude and refined petroleum products, since oil compounds are known to cause DNA damage with severe consequences for aquatic biota as demonstrated in long-term monitoring studies. This study aimed at the optimization and evaluation of small-scale higher-throughput assays (Ames fluctuation, micronucleus, Nrf2-CALUX®) covering different mechanistic endpoints as first screening tools for genotoxicity assessment of oils. Cells were exposed to native and chemically dispersed water-accommodated fractions (WAFs) of three oil types varying in their processing degree. Independent of an exogenous metabolic activation system, WAF compounds induced neither base exchange nor frame shift mutations in bacterial strains. However, significantly increased chromosomal aberrations in zebrafish liver (ZF-L) cells were observed. Oxidative stress was indicated for some treatments and was not correlated with observed DNA damage. Application of a chemical dispersant increased the genotoxic potential rather by the increased bioavailability of dissolved and particulate oil compounds. Nonetheless, the dispersant induced a clear oxidative stress response, indicating a relevance for general toxic stress. Results showed that the combination of different in vitro assays is important for a reliable genotoxicity assessment. Especially, the ZF-L capable of active metabolism and DNA repair seems to be a promising model for WAF testing.

Detection of high PBDD/Fs levels and dioxin-like activity in toys using a combination of GC-HRMS, rat-based and human-based DR CALUX® reporter gene assays.

Brominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs) are increasingly reported at significant levels in various matrices, including consumer goods that are manufactured from plastics containing certain brominated flame retardants. PBDD/Fs are known ligands for the aryl hydrocarbon receptor (AhR) but are not yet considered in the hazard assessment of dioxin mixtures. The aim of the present study was to determine if PBDD/Fs levels present in plastic constituents of toys could pose a threat to children's health. PBDD/Fs, unlike their chlorinated counterparts (PCDD/Fs), have not been officially assigned toxic equivalence factors (TEFs) by the WHO therefore, we determined their relative potency towards AhR activation in both human and rodent cell-based DR CALUX® bioassays. This allowed us to compare GC-HRMS PBDD/F congener levels, converted to total Toxic Equivalents (TEQ) by using the PCDD/F TEFs, to CALUX Bioanalytical Equivalents (BEQ) levels present in contaminated plastic constituents from children's toys. Finally, an estimate was made of the daily ingestion of TEQs from PBDD/Fs-contaminated plastic toys by child mouthing habits. It is observed that the daily ingestion of PBDD/Fs from contaminated plastic toys may significantly contribute to the total dioxin daily intake of young children.

Characterization of wastewater effluents in the Danube River Basin with chemical screening, in vitro bioassays and antibiotic resistant genes analysis.

Averaged 7-day composite effluent wastewater samples from twelve wastewater treatment plants (WWTPs) in nine countries (Romania, Serbia, Hungary, Slovenia, Croatia, Slovakia, Czechia, Austria, Germany) in the Danube River Basin were collected. WWTPs' selection was based on countries' dominant technology and a number of served population with the aim to get a representative holistic view of the pollution status. Samples were analyzed for 2248 chemicals of emerging concern (CECs) by wide-scope target screening employing LC-ESI-QTOF-MS. 280 compounds were detected at least in one sample and quantified. Spatial differences in the concentrations and distribution of the compounds classes were discussed. Additionally, samples were analyzed for the possible agonistic/antagonistic potencies using a panel of in vitro transactivation reporter gene CALUX® bioassays including ERα (estrogenics), anti-AR (anti-androgens), GR (glucocorticoids), anti-PR (anti-progestins), PPARα and PPARγ (peroxisome proliferators) and PAH assays. The potency of the wastewater samples to cause oxidative stress and induce xenobiotic metabolism was determined using the Nrf2 and PXR CALUX® bioassays, respectively. The signals from each of the bioassays were compared with the recently developed effect-based trigger values (EBTs) and thus allowed for allocating the wastewater effluents into four categories based on their measured toxicity, proposing a putative action plan for wastewater operators. Moreover, samples were analyzed for antibiotics and 13 antibiotic-resistant genes (ARGs) and one mobile genetic element (intl1) with the aim to assess the potential for antibiotic resistance. All data collected from these various types of analysis were stored in an on-line database and can be viewed via interactive map at https://norman-data.eu/EWW_DANUBE.

GR CALUX assay detects synthetic glucocorticoids in calf urine: a validation study.

Member States of the EU are required to monitor the use of pharmacologically active substances in food-producing animals. There is evidence, however, that the target-based approach currently applied in official monitoring plans might under-estimate the real incidence of growth promoter abuse in livestock. As demonstrated for sex hormones, the association of effect-oriented biological screening with chemical confirmatory techniques could be the best strategy in revealing the abuse of veterinary drugs. Here we demonstrate the reliability of a cell-based assay to screen calf urine samples for synthetic glucocorticoids. The validation included the most widely used synthetic drugs (flumethasone, dexamethasone, betamethasone, methylprednisolone and prednisolone) and was developed according to the Commission Decision 2002/657/EC, thus including the verification of cut-off level, the ß error, the specificity, ruggedness and stability. The study was carried out using prednisolone as representative substance at 5 ng mL-1 concentration. All blank and spiked urine fulfilled the EU criteria, moreover the method resulted in being specific and sound, and the analytes in urine were stable for at least 30 days. The assay results indicated its suitability for a qualitative analysis of calf urine samples. This method enabled the detection of low doses of synthetic glucocorticoids (GCs) in matrix (<2 ng mL-1 for flumethasone, dexamethasone, betamethasone; < 4 ng mL-1 for methylprednisolone; 5 ng mL-1 for prednisolone), with the possibility of detecting new or unknown molecules and cumulative effects of low-level mixtures with glucocorticoid bioactivity.

Effect-based trigger values for in vitro and in vivo bioassays performed on surface water extracts supporting the environmental quality standards (EQS) of the European Water Framework Directive.

Effect-based methods including cell-based bioassays, reporter gene assays and whole-organism assays have been applied for decades in water quality monitoring and testing of enriched solid-phase extracts. There is no common EU-wide agreement on what level of bioassay response in water extracts is acceptable. At present, bioassay results are only benchmarked against each other but not against a consented measure of chemical water quality. The EU environmental quality standards (EQS) differentiate between acceptable and unacceptable surface water concentrations for individual chemicals but cannot capture the thousands of chemicals in water and their biological action as mixtures. We developed a method that reads across from existing EQS and includes additional mixture considerations with the goal that the derived effect-based trigger values (EBT) indicate acceptable risk for complex mixtures as they occur in surface water. Advantages and limitations of various approaches to read across from EQS are discussed and distilled to an algorithm that translates EQS into their corresponding bioanalytical equivalent concentrations (BEQ). The proposed EBT derivation method was applied to 48 in vitro bioassays with 32 of them having sufficient information to yield preliminary EBTs. To assess the practicability and robustness of the proposed approach, we compared the tentative EBTs with observed environmental effects. The proposed method only gives guidance on how to derive EBTs but does not propose final EBTs for implementation. The EBTs for some bioassays such as those for estrogenicity are already mature and could be implemented into regulation in the near future, while for others it will still take a few iterations until we can be confident of the power of the proposed EBTs to differentiate good from poor water quality with respect to chemical contamination.